[资料简介]Harman Kardon哈曼卡顿AVR8000功放维修手册 ,包含结构图,电路图,印刷电路板图,零部件清单,共计242页 本音响维修手册为电子版----------------minimum (full CCW), for five minutes to stabilize the amplifiers. 6) Remove cover again. Plug in the two pin harness plug at first test point and connect to DMM set on the mV scale. Check and adjust AC line voltage to 120 volts again if necessary. Using a non-metallic screwdriver, adjust each of the idle current pots, one at a time, in the following manner: The final desired voltage at each test point is 10.5 mV, but you should arrive at this voltage by reducing a higher amount in5% increments with each adjustment, with the final adjustment set at 10.5 mV. This adjustment shouldbe made gradually in steps, so the amplifiers will have time to stabilize. Repeat this procedure at leastthree additional times, each time replacing the top cover (no screws necessary), and letting unit idle
turned ON for at least five minutes between each adjustment. Monitor the AC line voltage and adjust to
120 volts when necessary.) If a wattmeter is available, total wattage drawn from line should be 165 to 170 watts at idle.8) Replace the top cover and screws after the final adjustment.-电路图-图纸
大小:22.67 MB
格式:PDF
语言:英文 English Service Manual Download
页数:242页